• Facebook - Grey Circle
  • LinkedIn - Grey Circle

2008 BOA IMPRESS S60 BALER

2008 BOA IMPRESS S60 BALER

BALE SIZE = 1100 X 720 MM

HOPPER OPENING = 1400 X 995 MM

MOTOR SIZE = 37 KW

5 NEEDLES

WE ORIGINALLY INSTALLED THE MACHINE NEW AND RECENTLY REMOVED IT DUE TO UPGRADE

BODE EUROMAT  FULLY AUTOMATIC BALER ON HOOKLIFT FRAME

Middletons Baler + Feed Conveyor 

60 Tonne Press Force

Stomper, Shear Knives

MOTOR SIZE = 57 KW

Machine in good condtion and full working order

£75,000.00

GBP 15,000.00

POA

MIltek 306E - 509 Air Operated Baler - New Un-Used

This machine is operated from a

 

compressor, the baler only requires a

single air source from a standard single

 

phase compressor. This means the

 

machine can be located outside if required.

 

This baler is new and unused and comes

 

direct from stock so no delay.

 

This machine is ready to go just add

 

compressed air

£4,750.00

Used - In good working order

P.OA

This machine has just been removed in working condition from a customers site.

 

The machine is a fully automatic channel press baler.

 

Suitable for multi material baling.

The Miltek 205TS baler has a long vertical chamber creating a bale

 

almost twice the size of a model 102,

 

while covering a similarly small floor space

  • Constant pressure: highest compaction degree

  • Bale plastic, cardboard and other material

  • Ergonomic, easy, clean and safe

  • Low on noise, low on energy

  • Long vertical chamber

  • Manageable bale size

£15,000.00

Suitable for sorting plastics and various other materials. 

 

Used - In good working order

£60,000.00

Horizontal Baler for the processing of many types of materials

 

within the waste , recycling and packaging industries. It’s use

 

is very versatile and can process the following type of

 

materials:- Plastic film , Plastic bottles , Cardboard / OCC ,

 

aluminium cans , steel cans etc.

 

BALER DIMENSIONSHeight 1.980 m
Width 1.04 m
Depth 0.72 m
Weight 230 kg
Transportation Ht 1.63 m
Power Supply 220 - 240 V (single phase)
Motor 1.5 kW 13 Amp
Pressing Force up to 3.5 Ton
Noise Level 72 decibels
BALE DIMENSIONS
Height 0.800 m
Width 0.70 m
Depth 0.50 m Weight (depending on material used)
Up to 60 kg
Cycle Times 24 seconds
LOADING APERTURE SIZES
Height 0.492 m
Width 0.700 m
Depth 0.500 m

GENERAL SPECIFICATIONS Two-Ram Model 2R63 AUTOMATIC BAILING PRESS
62” (158cm) Loading 52.5” (135cm) Frame 16’ 2” (493cm) 16’ 11” (516cm) 60” (153cm)W x 29.5” (75cm)H 54” (138cm)W x 40” (102cm)L 32,730 lbs. (14,846kg) (as shown)
2 - 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod 6” (15cm) Bore x 66” (168cm) Stroke x 3.5” (9cm) Hard Chrome Rod 105 gal. (399 liters) 34 Gal. (130 liters) Pressure Compensated Horse Power Limited Piston Pump  20 HP TEFC 230-460 V 3 PHASE 3,000 PSI Automatic Mode  (3,250 Maximum) 159,467 lbs. 95 PSI 29 Seconds - 21 Sec. Short Stroke 60”L x 48”W x 30”H (152cm L x 122cm W x 76cm H) Hi-Flow Cushion Shift Design NEMA 12 RATED UL/CSA/CE Approved NEMA 12 Rated
1,200 lbs. (544kg) 4.2 TPH 2,000 lbs. (907kg) 9.4 TPH 1,500 lbs. (680kg) 8.0 TPH 1,600 lbs. (726kg) 8.0 TPH 1,100 lbs. (499kg) 3.3 TPH 800 lbs. (363kg) 2.1 TPH(May vary with percent of capped bottles) 625 lbs. (284kg) 3.0 TPH 1,200 lbs. (544kg) 5.6 TPH
Automatic Tie System Hour Meter Replaceable Hardox Wear Bale Discharge Table Interlocking Construction Liners Lower Photo eyes Air to Oil Cooler Percent of Bale Complete Full Platen Penetration Regenative Circuit Indicator Lights Short Stroke Selector Bale Release Door (50%, 75%, 100%)
HEIGHT LENGTH WIDTH CHAMBER FEED OPENING SHIPPING WEIGHT
MAIN CYLINDER EJECT CYLINDER OIL RESERVOIR INDEPENDENT PUMPS MOTORS SYSTEM PRESSURE OVERALL PLATEN FORCE PLATEN PSI CYCLE TIME ESTIMATED BALE SIZE DIRECTIONAL VALVE ENCLOSURE CONTROLS
OCC MAGAZINES NEWSPAPER OFFICE PAPER HDPE PET ALUMINUM CANS TIN CANS

 

P.OA

 

Used - In good working order

 

Used - In good working order

£6,600.00

P.O.A

£1000,00

 

Used - In good working order

 

Used - In good working order

FEATURES

• Compact design makes this machine ideal for locations where space is at a minimum e.g. Garage forecourts, retail outlets, offices, pubs, restaurants and fast food outlets

• Suitable for small volumes of waste

EXCEL 2R63 (2)